Reloading Tables

LOADING DATA & SAFETY INFORMATION


 Belmont Action Rifle Powder:

loadtablerifle

The best products change and improve over time with every generation.
This modern propellant powder is the result of constant research & development going back more than 45 years at the world’s most modern spherical powder factory built in the 1970’s.
Since Fred Olsen’s 1933 patent there have been several generations of this famous ‘spherical powder’ with its long shelf life, high density, temperature stability & low flame temperature. (the results of continuous improvement)
This Propellant is intended for careful reloaders who will take the time to ensure safe reloading procedures are followed.

WARNING

Your reloads should not exceed maximum loads listed on the included chart.
Ballistic data varies greatly depending on many factors including components used, how they are assembled, the type of firearm used & the reloading techniques and safety precautions utilised by the individual.
NEVER mix any two powders regardless of type, brand or source. NEVER substitute any smokeless powder for black powder, Pyrodex or muzzle loading powder.
The individual assumes all risk of safe loading practices. Failure to follow safety guides could result in gun damage, injury or death to the user or bystanders.
This powder is made for full charge loads and as such is not recommended for reduced loads.
Loading with this powder will benefit from quality primers so as to give good clean ignition.

DO NOT EXCEED THE MAXIMUM LOADS SHOWN IN THE LOADING CHART
KEEP OUT OF REACH OF CHILDREN

 


 Belmont Action Pistol Powder:

pistol1

pistol2

The best products change and improve over time with every generation.
This modern propellant powder is the result of constant research & development going back more than 45 years at the world’s most modern spherical powder factory built in the 1970’s
Since Fred Olsen’s 1933 patent there have been several generations of this famous ‘spherical powder’ with its long shelf life, high density, temperature stability & Low flame temperature, (the results of continuous improvement)
This Propellant is intended for careful Reloaders who will take the time to ensure safe reloading procedures are followed.

WARNING:
Your reloads should not exceed maximum loads listed on the included chart.
The charge recommendations, velocity & pressures are SAAMI testing data.
It is recommended you start loading by reducing data 10% and work up.
Ballistic data varies greatly depending on many factors including components used, how they are assembled, the type of firearm used & the reloading techniques and safety precautions utilised by the individual.
NEVER mix any two powders regardless of type, brand or source. NEVER substitute any smokeless powder for black powder, Pyrodex or muzzle loading powder.
The individual assumes all risk of safe loading practices. Failure to follow safety guides could result in gun damage, injury or death to the user or bystanders.
This Powder is made for full charge loads and as such is not recommended for reduced loads.
Loading with this powder will benefit from quality primers so as to give good clean ignition.
DO NOT EXCEED THE MAXIMUM LOADS SHOWN IN THE LOADING CHART
KEEP OUT OF REACH OF CHILDREN

TEST LOAD EXAMPLE : 5.4 grains Belmont Action Pistol  with 9×19 124 grain CMJRN
Federal Primer, Winchester SP or similar primer, ODL G.P 9MM case, Frontier 124 grain CMJRN (Actual weight 124.4 grain)

loadtablepistol
Comments:
All rounds loaded with weighed charges, & fired within 90 minutes
Temp: 20 degrees centigrade

Velocity: Oehler Model 43 @ 5.18 meters, muzzle velocity calculated from B.C .130

WARNING: HIGHLY FLAMMABLE, STORE SAFELY & KEEP OUT OF REACH OF CHILDREN
1.3C UN 0161

Leave a Reply

Your email address will not be published. Required fields are marked *